Importance of Checking Your Car Oil

Whether you’ve just purchased a new vehicle and you’re looking to stay on top of maintenance, or you’re just arming yourself with automotive knowledge, learning how to check car oil is important. Whatever you’re looking to do, we’re here to help. One of the easiest ways to ensure your ride continues to run on Rome roads for many miles ahead is by staying on top of oil maintenance. Oil is essential for lubricating your vehicle’s engine so that it can continue to function smoothly. Oil changes are often performed once every six months or in between your vehicle’s recommended intervals.

But, what can you do in between oil changes to ensure you never run into any issues when you’re driving around Acworth? We would recommend you regularly check your car’s oil. If you’re not sure how to check car oil, don’t worry! Today, the experts at Welborn GMC Of Cartersville will provide step-by-step instructions on how to check car oil.

How to Check Car Oil

Before we get started on checking your vehicle’s oil, it’s important to go over a couple of different things. Keep in mind that many modern vehicles might not have a way for you to manually check your oil. Additionally, if you notice your oil level is low and you need to add oil, make sure you’re using the correct type. If you run into any of these issues, it’s best to schedule a service appointment so that one of our technicians can assist you. Now that we’ve gotten that out of the way, let’s take a look at how to check car oil below:

1. With the vehicle turned off and parked on level ground, find and pull on your vehicle’s hood release.
2. Ensure the engine is cold and find the oil dipstick.
3. Remove the dipstick from the tube and wipe the oil off of it.
4. Fully reinsert the dipstick back into the tube and pull it out again.
5. Take note of the oil level and even rub some between your fingers to check texture and consistency.
6. If you notice anything unusual, it’s best to bring it to a professional to address the issue.

Common Way to Reset Your Oil Change Indicator Light

After you’ve changed your oil in your own Canton driveway, you might be wondering if there’s a way to reset your oil change indicator light. Many vehicles commonly have the same reset process, but it might be different for others. You can always follow our steps first to see if you can reset your oil change indicator light. If this doesn’t work, you can talk to our service team for more specific instructions. Here’s how you can possibly reset your oil change indicator light:

1. Turn everything in your vehicle off except for the engine.
2. On your dashboard, locate the reset button or stick.
3. Press and hold the button until the oil change indicator light flashes or turns off.
4. Turn your vehicle off and back on.
5. The oil change indicator light should now be off!

Get More Service Advice From the Professionals at Welborn GMC Of Cartersville!

Now that you know how to check your vehicle’s oil, do you have the itch to learn more service tips such as how to jump start a car or rotate your tires? We’ve got you covered at Welborn GMC Of Cartersville! Come visit our service center in Cartersville or contact us for more information. We hope to help you keep your vehicle on the streets for many years to come! If you check your car’s oil and you notice it’s time to get an oil change, we’ve got you covered. Wondering about the cost of an oil change? Learn about oil change prices and more today at our service center.